Step 8: Test The Operation Of The Enclosure.; Step 9: Place The Stealthbox In The Vehicle.; Specifications - JL Audio Stealthbox SB-F-TRKCTR/10W3 Installation Manual

Fits full-size ford pickup trucks equipped with a center console

Table of Contents

STEP 7: Run speaker wire to the mounting location of the

Stealthbox. Trim to length and attach to the Stealthbox.

STEP 8: Test the operation of the enclosure.

STEP 9: Place the Stealthbox in the vehicle. The brackets on the

bottom of the Stealthbox should fit over the studs in the floor of the

vehicle.

STEP 10: Using the nuts removed in Step 2, bolt the Stealthbox

into place. This step will require an open end wrench. Tighten

securely.

This completes the installation.

Enclosure Type: Acoustic Suspension (Sealed)

Driver Type: JL AUDIO 10W3-D6 Subwoofer

Cont. Power Handling: 250 Watts

Nominal Impedance: 3

P .O. Box 839004, Miramar, Florida 33083-9004 Voice: (954) 981-9497 Fax: (954) 987-7855

Sheet SKU#011113 Revision 9/4/01

SB-F-TRKCTR/10W3, JL AUDIO, Inc 1999 • Page 3

Table of Contents

Do you have a question about the Stealthbox SB-F-TRKCTR/10W3 and is the answer not in the manual?

Stealthbox sb-f-trkctr2/10w3v3