3.1.2 Settings on the Programming Mode
Item
One-touch Dialling Assign-
ment Mode Selection
Do you prefer to set the
One-touch dialling only?
*1
Not available for a PS
*2
Only available for KX-T7633/KX-T7636/IP-PTs (except KX-NT265/KX-NT321)/KX-DT343/KX-DT346 telephones.
*3
CO button numbers (25–36) are available only when the Add-on Key Module is set up to your telephone.
*4
Not available for the KX-T7665
*5
This setting applies to both outside and intercom calls. For intercom calls, this feature must be enabled through system programming.
*6
Only available for certain digital proprietary telephones.
*7
Only available for KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346 telephones.
*8
Registering and cancelling a Bluetooth wireless headset may take time. Please avoid any interruption during that time by, for example,
going off-hook.
CAUTION
There is a risk that fraudulent telephone calls will be made if a third party discovers your pass-
word (extension PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a.
b.
c.
•
After the programme number is entered, the programme title is displayed.
The programming screen can be changed with the Navigator Key (Up or Down).
•
You can select the parameter with the Navigator Key (Up or Down) instead of entering a num-
ber.
200
User Manual
Programming In-
put
#
Keeping your PIN secret.
Selecting a complex, random PIN that cannot be easily guessed.
Changing your PIN regularly.
Selection & Parameter
No—Normal (Any Flexible
0
buttons can be modified.)
Yes—Only One-touch dialling
buttons can be modified. Howev-
1
er, to modify them, there is no
need to enter "2" before the num-
ber.