Using Voice Messaging (Built-In Simplified Voice Message [Svm]) - Panasonic KX-TDA30 User Manual

1.6.2 Using Voice Messaging (Built-in Simplified Voice Message [SVM])

1.6.2 Using Voice Messaging (Built-in Simplified Voice Message
[SVM])
Your PBX can provide you with answering machine service if an SVM card is installed.
Your extension is assigned a message box, into which callers can leave voice messages for you.
After callers reach your message box, they will hear your personal greeting message. You can record two
kinds of personal greetings: a normal greeting message and a greeting message for each time mode. You can
also play back and clear your greeting messages and the voice messages left by callers.
–
Recording a Normal Greeting Message
–
Recording a Greeting Message for Each Time Mode
–
Redirecting Your Calls to Your Message Box
–
Leaving Voice Messages
–
Listening to Voice Messages Left by Callers
–
Accessing Your Message Box from an Outside Telephone
–
Accessing the Message Box of Another Extension from Your Extension
•
You may hear a busy tone when trying to access your message box if too many other users
are already accessing their message boxes. In that case, wait a few minutes and try again.
•
If the used recording space (including greeting messages and voice messages left by callers)
for the SVM card reaches a certain limit, the display informs you that the recording space is
almost full, and you will hear dial tone 3 when going off-hook.
Dial Tone 3
1 s
•
Operation Reference When Accessing Your Message Box
After entering the SVM feature number ( 38), the operations below are available by entering
the corresponding numbers.
Operation No.
0
1
2
3
8
# 6
102 User Manual
To clear the normal greeting message
To record a normal greeting message
To play back the normal greeting message
To listen to voice messages left by callers
To set a greeting message for each time mode
To leave a voice message to another extension's message box
Operation