ZiLOG ZENETSC0100ZACG User Manual page 10

Ethernet Smart Cable
User Manual
Page 10
Figure 7. Ethernet Smart Cable Password Web Page
3. Once the configuration in the Settings tab are changed, click the Submit button. A
message acknowledging that changes have been made appears beneath the web page.
4. To make the changes permanent, reboot the ESC. To do so, press the Reboot button.
The ESC will reboot. If you have changed the cable's IP address, redirect the web
browser to point to the new IP address. If the IP address is left as it was, the ESC home
web page will appear again, displaying the changes you made.
Installing the Ethernet Smart Cable UM020702-0107