LinkPoint 3000 Reference Manual page 33

Display Message
__App. not available
_ Time__Load__Setup
[ ] [ ] [ ]
_____READY XXX
JAN-03-00_MON_12:00P
[ ] [ ] [ ]
__CLEAR_to_resume
_ Time__Load__Setup
[ ] [ ] [ ]
Enter password:
(optional)
Download Set_port
[ ] [ ] [ ]
Select download port
Modem RS232
[ ] [ ] [ ]
RS232 setup
Baud Parity
[ ] [ ] [ ]
Current baud: 19200
1200 2400 9600
[ ] [ ] [ ]
RS232 setup
Baud Parity
[ ] [ ] [ ]
Current parity: None
Even None Odd
[ ] [ ] [ ]
Download Set_port
[ ] [ ] [ ]
Display Message
LinkPoint International, Inc.     1999
DOWNLOAD PROCEDURES
Operator Action
Press the middle [ ] key to select LOAD.
OR if there is already an application loaded...
Hold down the [ALPHA] key while pressing [7] [1] [3] [9] to
enter the boot mode.
Press the middle [ ] key to select LOAD.
If prompted, key in the password and press [ENTER]. The
password may be obtained through the bank/ISO or FDMS
Help Desk.
Press the right [ ] key to select SET PORT.
Press the right [ ] key to select RS232.
Press the left [ ] key to select BAUD.
Select the correct baud rate, press [CLEAR] to accept the
default of 19200. Press the [ ] key below your choice and
press [CLEAR] OR press the [#] key to see other options.
Press the right [ ] key to select PARITY.
Select the correct parity (default is None). Press the [ ] key
below your choice and press [CLEAR] three times.
Press the left [ ] key to select DOWNLOAD.
Operator Action
29 LFRST23 Reference Manual