Modecom MC-WR11 User Manual page 20

Wireless router
Mode: If you choose 'Allow Listed', only those clients whose wireless MAC
addresses are in the access control list will be able to connect to your Ac-
cess Point. When 'Deny Listed' is selected, these wireless clients on the
list will not be able to connect the Access Point. The MAC Address format
is 001122334455.
4.1.3 Wireless Distribution System (WDS)
WDS uses wireless media to communicate with other APs, like the Ethernet
does. To do this, firstly you must set AP Mode to WDS or AP+WDS in basic
setting, then enable WDS function and set another AP MAC which you want
to communicate with. The WDS supports WEP and WPA security mode. Of
course in order to make APs work, you have to keep them working on the
same channel and security mode as source AP.
www.modecom.eu
20