Using The Memories; Clearing The Memories - Casio Fx-82AU PLUS II User Manual

Using the memories

The calculator has an independent memory that can store the result of a calculation. In addition the
fx82AU PLUS II has six pronumerals A, B, C, D X and Y which may be assigned values. The fx100AU PLUS
has eight pronumerals A through F as well as X and Y which may be assigned values.
The independent memory M
Store the result of a calculation by pressing m. When a non-zero amount is stored in the memory an M
is displayed at the top left of the screen.
In the above screen, 15 is stored in the M memory. The button sequence to add the memory value to 12
is: 12+Jm=.
Storing values in other memories
In the above screen the result of 3 + 5 is being stored in A. The button sequence is
3+5qJz. The following button sequence stores the result of 3 + 5 in other memories:
Store in memory B: 3+5qJx
Store in memory C: 3+5qJc
and so on.
Using values stored in A, B, etc
The stored value for A is 8. The button sequence for the above screen is 3d+Jzd=.
Clearing the contents of all the memories
The calculator remembers stored values even after it has been turned off for a long time. Use the button
sequence q9 then follow the screen directions to clear data.
© Sue Thomson and Shriro
This page may be photocopied for non-commercial use. Page 14