Features unique to the fx-100AU PLUS
Vectors
Mode: 6 Vector
The vector menu performs calculations with two and three dimensional vectors.
Method: The vector menu involves two stages. First enter the details of up to three vectors. Then press
the C to indicate the vector information is complete. Only after these two steps are complete will the
vector key operate correctly.
Example
Multiply the vectors represented by [3, 5] and [0, 6].
Press MODE 6 followed by 1, select 2 for two dimensions. Press 3=5=.
Press MODE 6 followed by 2, 2 then enter 0=6=.
Press C. This completes centering the vector information.
q53Oq54=.
© Sue Thomson and Shriro
This page may be photocopied for non-commercial use.
Page 19