ZiLOG ZENETSC0100ZACG User Manual page 10

Ethernet Smart Cable
User Manual
Page 10
Figure 8. Ethernet Smart Cable Password Web Page
3. Once you have changed the configuration in the
A message acknowledging that changes have been made appears beneath the web
page.
4. To make your changes permanent, you must reboot the Ethernet Smart Cable. To do
so, press the Reboot button.
The Ethernet Smart Cable will reboot. If you changed the cable's IP address, you must
redirect your web browser to point to the new IP address. If you left the IP address as
it was, the Ethernet Smart Cable home web page will appear again, displaying the
changes you made.
Installing the Ethernet Smart Cable
tab, click the Submit button.
Settings
UM020701-0506