Using The Vacuum Cleaner - Sanyo SC-X80 Instruction Manual

USING THE VACUUM CLEANER

ON/OFF SWITCH
Start or stop vacuum cleaner
by pushing on the switch.
OFF
ADJUSTING THE HANDLE
The handle of this vacuum cleaner can be set to one of
three positions-Upright,Normal,Parallel.Place your foot
on either one of the handle release points as shown and pull
back on the handle until it releases from its upright position.
Upright position
The handle is normally locked in this
position for storage or when using the
attachments.
Push the handle forward
until it locks.
EDGE CLEANING
This vacuum cleaner is equipped with an "edge cleaning" function for cleaning carpet edges
near baseboards and stationary furniture.
ON
ON/OFF Switch
Handle Release
Normal position
This position is used for normal cleaning.
Parallel position
This position is used for cleaning under
furniture.
6