Central Station Test - C&K systems LED Keypad User Manual

CENTRAL STATION TEST

OPTION
INSTALLED
This option tests the reporting capability of your system by sending a test
message to the central station. Weekends are the best time for the CENTRAL
STATION TEST. To schedule one, call our central station at:
To initiate the CENTRAL STATION TEST:
Enter your PIN (if required),
PIN
REQUIRED
push the
the digit "1", then push the # key.
.
If the test message was successfully transmitted to
the central station, the keypad will beep twice.
.
If the test message was not successfully transmitted to the central station, the
keypad will beep five times, and the SERVICE light will flash fast. Call our Service
Department for assistance.
CENTRAL STATION
key, enter the digit "6",
6 1
27