HOME ARMING
Home arming arms perimeter zones, while bypassing interior zones.
Enter your PIN (if required),
PIN
REQUIRED
push the
then push the # key.
.
The keypad will beep twice to confirm that the system is armed.
.
The red ARM light will be on while the system is armed.
.
.
The red ZONE light(s) of bypassed zones will flash slowly.
.
You can enter the premises without setting off an alarm through any time delay entry.
(Don't forget to disarm the system after entering!)
.
OPTION
Exit Delay Disable (see page 16).
INSTALLED
12
Make sure all the ZONE lights are off.
key, enter the digit "4",
Home Arming allows you to move about freely inside the premises while the system is
armed.
4