Disarming The System; To Disarm The System - C&K systems LED Keypad User Manual

TO DISARM THE SYSTEM:

Enter only through a TIME DELAY door.
.
If the ENTRY PRE-ALARM option is installed, the keypad will sound constantly until 10
OPTION
INSTALLED
seconds before the delay time expires (or the panel is disarmed), then beep rapidly for
the last 10 seconds.
Enter your PIN within
PIN
REQUIRED
seconds and push the # key.
Make sure the red ARM light on the keypad goes off.
.
If the ARM light does not go off, wait for the keypad to beep five times, then enter your
PIN again.
.
The keypad will beep twice to confirm that the system has been disarmed.
.
All bypasses are removed.
17