If the event is disabled, it will go to
next event setting.
Press "Prog" key once to
confirm the setting and it will go to
target setting.
7
Target will keep flashing, press
Up/Down key to adjust Cool set
point for cooling.
Press "Prog" key once to
confirm the setting and it will go to
next event mode.
8
Follow the program UI to complete
the whole scheduling or press
Home key once to save and exit.
Z-Wave Add (Inclusion) / Delete (Exclusion) Mode
Symbol
Note 1: This
Please perform the Delete (Exclusion) before adding into the new Z-Wave network.
Note 2: User can control the ZTS-100 through gateway or controller after adding into the Z-Wave
network.
Inclusion and Exclusion Mode Key Description
N/A
N/A
N/A
N/A
Add (Inclusion) / Delete (Exclusion)
Back to Home
icon is represent the ZTS-100 has been added into the Z-Wave network.
21
-