Reset ZTS-100 to Factory Default Settings
Step Procedure / Description
Press and hold "Fan " +
"Mode" keys for 2 seconds to
entry the reset mode.
Press Up/Down key to toggle
Yes/No selection.
1
Press "Prog" key once to
confirm the action.
=> It will perform the reset if select
"Yes" or
=> It will back to home page if
select "No".
LCD display done after reset to
factory default settings.
(The following data will be reset to
2
default:
1. Clock : 12:00am
2. Day: Mon
3. Temperature scale: F
4. Swing : 2F
5. Diff: 2F
6. Default schedule
7. Operation mode: OFF
8. Default Heat override set point
9. Default Cool override set point
10. Filter counter cleared
11. Delete from network
LCD indication
27
⇓