Other Functions; Save Energy Button; Mode Button; Fan Button - Z-Wave CT100 Operation Manual

Other Functions

Save Energy Button

The "Save Energy" feature on the CT100 provides a simple, easy-to-use way to help you manage
your energy use. SAVE ENERGY automatically adjusts your Target Temperature up in COOL or
down in HEAT by 4 o F. To use Save Energy, press the Save Energy button in the upper left corner
of the unit. The screen will now read "Save Energy". To return to normal operation, press the "Save
Energy" button again. This is useful to save energy if you are gone for a short time.

MODE Button

The mode button sets the CT100 to HEAT COOL or OFF modes. Press it once to step to the next
mode. If the CT100 is in OFF and you want to return to the mode you were previously in, touch the
OFF indicator on screen.

FAN Button

The fan control is normally in AUTO mode, meaning that the fan operates automatically with the
HVAC system and the thermostat. When the fan button is pressed the fan goes ON; the fan will run
continuously in this manual override until switched back to AUTO by pressing the FAN button again.
[NOTE: Fan ON function is available in the OFF mode to allow simple ventilating.]
11
PG