User Maintenance - Conair 070XCHC Instruction & Styling Manual

USER
MAINTENANCE
Your dryer is virtually maintenance-free. No
lubrication is needed. For proper operating
performance, the dryer must be kept clean.
When cleaning is needed, unplug the cord, and
clean dust and lint from air intake openings
with a small brush or the brush attachment of a
vacuum cleaner. The outer surface of the dryer
should be wiped clean with a damp cloth only.
Blocked or clogged air intake vents will
cause the dryer to overheat. If overheating
occurs, an automatic safety device will shut
the dryer or the heat off to prevent damage or
personal injury. If the unit or the heat cycles off,
unplug the cord and allow the dryer to cool for
10 to 15 minutes before restarting. Make sure
the air vents are clean.
CAUTION
NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never wrap
the cord tightly around the dryer. Damage will
occur at the high flex point of entry into the
dryer, causing it to rupture and short. Inspect
the cord frequently for damage. Stop use
immediately if damage is visible or unit
stops or operates intermittently.
If the cord or dryer is damaged or does not
operate properly, return it for repair to an au-
thorized Conair service representative only. No
repairs should be attempted by the consumer.
STORAGE - Important
When not in use, your dryer should be
disconnected and stored in a safe, dry
location, out of reach of children. Do not wrap
line cord around dryer. Allow the cord to hang
or lie loose and straight at the point of entry
into the dryer.