Advertisement
USER
MAINTENANCE
Your dryer is virtually maintenance free. No
lubrication is needed. For proper operating
performance, the dryer must be kept clean.
When cleaning is needed, unplug the cord, and
clean dust and lint from air intake openings
with a small brush or the brush attachment of
a vacuum cleaner. The outer surface of the
dryer should be wiped clean with a damp cloth
only.
Blocked or clogged air intake vents will cause
the dryer to overheat. If overheating occurs, an
automatic safety device will shut the dryer or
the heat off to prevent damage or personal
injury. If the unit or the heat cycles off, unplug
the cord and allow the dryer to cool for 10 to
15 minutes before restarting. Make sure the air
vents are clean.
CAUTION
NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never wrap
the cord tightly around the dryer. Damage will
occur at the high flex point of entry into the
dryer, causing it to rupture and short. Inspect
the cord frequently for damage. Stop use
immediately if damage is visible or unit stops
or operates intermittently.
If the cord or dryer is damaged or does not
operate properly, return it for repair to an
authorized Conair service representative only. No
repairs should be attempted by the consumer.
Advertisement
