Advertisement
USER
MAINTENANCE
Your dryer is virtually maintenance-free. No
lubrication is needed. For proper operat-
ing performance, the dryer must be kept
clean. When cleaning is needed, unplug the
cord, and clean dust and lint from air intake
openings with a small brush or the brush
attachment of a vacuum cleaner. The outer sur-
face of the dryer should be wiped clean with a
cloth only.
Blocked or clogged air intake vents will cause
the dryer to overheat. If overheating occurs, an
automatic safety device will shut the dryer or
the heat off to prevent damage or personal in-
jury. If the unit or the heat cycles off, unplug
the cord and allow the dryer to cool for 10 to
15 minutes before restarting. Make sure the air
vents are clean.
CAUTION
NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never wrap
the cord tightly around the dryer. Damage
will occur at the high flex point of entry into
the dryer, causing it to rupture and short. In-
spect the cord frequently for damage. Stop use
immediately if damage is visible or unit stops
or operates intermittently.
If the cord or dryer is damaged or does not
operate
properly,
to an authorized Conair service representative
only. No repairs should be attempted by the
consumer.
STORAGE - Important
When not in use, your dryer should be discon-
nected and stored in a safe, dry location, out of
reach of children. Do not wrap line cord around
dryer. Allow the cord to hang or lie loose and
straight at the point of entry into the dryer.
return
it
for
repair
Advertisement
