Advertisement
USER
MAINTENANCE
Your dryer is virtually maintenance free. No
lubrication is needed. For proper operat-
ing performance, the dryer must be kept
clean. When cleaning is needed, unplug the
cord, and clean dust and lint from air intake
openings with a small brush or the brush
attachment of a vacuum cleaner. The outer
surface of the dryer should be wiped clean
with a damp cloth only.
Blocked or clogged air intake vents will
cause the dryer to overheat. If overheating
occurs, an automatic safety device will shut
the dryer or the heat off to prevent damage
or personal injury. If the unit or the heat cy-
cles off, unplug the cord and allow the dryer
to cool for 10 to 15 minutes before restart-
ing. Make sure the air vents are clean.
CAUTION
NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never wrap
the cord tightly around the dryer. Damage
will occur at the high flex point of entry into
the dryer, causing it to rupture and short. In-
spect the cord frequently for damage. Stop
use immediately if damage is visible or
unit stops or operates intermittently.
If the cord or dryer is damaged or does not
operate properly, return it for repair to an
authorized Conair service representative
only. No repairs should be attempted by the
consumer.
STORAGE - Important
When not in use, your dryer should be
disconnected and stored in a safe, dry
location, out of reach of children. Do not
wrap line cord around dryer. Allow the cord
to hang or lie loose and straight at the point
of entry into the dryer.
Advertisement
