Conair quiet tone 060QR Instruction & Styling Manual

IMPORTANT 3. Use this appliance only for its intended use
as described in this manual. Do not use attach-
SAFETY
ments not recommended by the manufacturer.
Do not use an extension cord to operate dryer.
INSTRUCTIONS
4. Never operate this appliance if it has a
damaged cord or plug, if it is not working
When using electrical appliances, especially
properly, if it has been dropped, damaged,
when children are present, basic safety pre-
or dropped into water. Return the appliance
cautions should always be followed, includ-
to a Conair Service Center for examination
ing the following:
and repair.
READ ALL INSTRUCTIONS 5. Keep the cord away from heated surfaces.
Do not wrap the cord around the appliance.
BEFORE USING
6. Never block the air openings of the appli-
ance or place it on a soft surface, such as a
KEEP AWAY FROM WATER
bed or couch, where the air openings may be
DANGER
blocked. Keep the air openings free of lint,
–
Any hair dryer is
hair, and the like.
electrically live even when the switch is off.
7. Never use while sleeping.
To reduce the risk of death or injury by
8. Never drop or insert any object into any
electric shock:
opening or hose.
9. Do not use outdoors or operate where
1. Always "unplug it" immediately after using.
aerosol (spray) products are being used or
2. Do not use while bathing.
where oxygen is being administered.
3. Do not place or store appliance where it
10. Do not use an extension cord with this
can fall or be pulled into a tub or sink.
appliance.
4. Do not place in, or drop into, water or other
11. Do not direct hot air toward eyes or other
liquid.
heat-sensitive areas.
5. If an appliance falls into water, "unplug it"
12. Attachments may be hot during use.
immediately. Do not reach into the water.
Allow them to cool before handling.
WARNING
–
13. Do not place appliance on any surface
To reduce the risk
while it is operating.
of burns, electrocution, fire, or injury to persons:
14. While using the appliance, keep your hair
1. This appliance should never be left un-
away from the air inlets.
attended when plugged in. Do not pull,
15. Do not use with voltage converter.
twist, or wrap line cord around dryer.
For a dual voltage hair dryer:
2. This appliance should not be used by, on,
16. Be sure dual voltage selector is in correct
or near children or individuals with certain
disabilities.
voltage position before operating. Before IMPORTANT
plugging in, read the information about dual
voltage contained in the instruction section of 1875 WATT OPERATING GUIDE
this manual.
Use of this dryer on the same circuit or fuse with
17. This appliance was set at the factory to
other electrical products or appliances may trip a
operate at 125 volts. Refer to Additional
15 amp circuit breaker or blow a 15 amp fuse.
Information section of this manual for con-
NEVER replace the fuse with one rated higher
version to 250 volt operation.
than the capacity of the circuit. Doing so could
SAVE THESE
result in an electrical fire.
WHAT TO DO IF HAIR DRYER ACCIDENTALLY
INSTRUCTIONS
FALLS IN WATER
PLEASE NOTE: When the electrical elements
OPERATING
of the hair dryer come in contact with water,
the Protection Plus ® Plug is designed to shut
INSTRUCTIONS
down immediately.
1. Be sure to unplug the hair dryer.
This appliance is intended for household use
2. Remove from water. Once the appliance is
only. Use on Alternating Current (50/60 hertz)
removed from water, it should be returned to a
only. Standard Dryers are designed to operate
Conair service center.
at 110 to 125 volts A.C. For special dual voltage
REMEMBER: Do not use the hair dryer after it
dryers, see Additional Information.
has fallen in the water until it has been serviced.
This appliance has a polarized plug (one blade
CHECK ALCI SAFETY FEATURE EVERY TIME
is wider than the other). As a safety feature,
YOU USE APPLIANCE.
this plug will fit in a polarized outlet only one
This appliance is equipped with an Appliance
way. If the plug does not fit fully in the outlet,
Leakage Circuit Interrupter (ALCI), a safety
reverse the plug. If it still does not fit, contact
feature that renders it inoperable under some
a qualified electrician. Do not attempt to defeat
abnormal conditions, such as immersion in
this safety feature.
water. To make sure the ALCI is functioning
properly, perform the following test. The pur-
pose of this test is to allow you to make sure
the water sensing system (ALCI) is working.
1. Plug in the appliance and press test button
on plug (See appropriate diagram below).
2. The appliance will stop working. There will be
an audible click and reset button will pop out.
3. To reset ALCI with a reset button, unit should with your styling brush, direct hot air through a
be unplugged. Then push reset button in, and section of hair at a time. Move dryer steadily
reinsert plug into outlet. across each section so that the hot air passes
through hair. Direct air flow at hair, not scalp.
Reset
Reset 2. Keep dryer's air intake vents unobstructed
and free from hair while drying.
3. To avoid over drying, do not concentrate heat
on any one section for any length of time. Keep
Test
dryer moving as you style.
Test
4. For quick touch ups between shampoos,
dampen hair with a mist of water before
4. If ALCI is not functioning properly, return
styling with the dryer.
appliance to nearest service center.
5. When using your dryer to create curls and
5. It is important that if immersion occurs,
waves, dry hair almost completely on a warmer
this unit be brought to a service center. Do not
temperature setting, then finish styling with the
try to reset.
special turbo cool shot feature to close hair shaft
6. Be sure to repeat test every time you use
and lock in style.
the unit to confirm ALCI is operational.
BODY & VOLUME
Should the appliance go off and the reset but-
To create extra volume, turn head upside down
ton pop up during use, this could indicate a
while drying. Position the air flow toward the
malfunction in the unit. Remove plug from
roots for maximum lift. When hair is dry, toss
outlet and allow the appliance to cool.
head back and brush hair into place.
Reinsert plug into outlet.
STRAIGHTENING
The appliance should then function normally.
Work with hair in sections when creating a
If not, return to an authorized Conair Service
super straight look. Using a large round brush
Center for evaluation and repair.
(approximately 2" in diameter), hold hair taut
SUPER STYLING GUIDE in each section and bend ends slightly under
as you dry.
Your best looks begin with a good haircut that's
well maintained. Always treat hair right with
MAKING WAVES
Conair ® and Jheri Redding ® superior quality
Tousled, natural-looking waves are easily creat-
shampoos, conditioners, and finishing products.
ed by grasping hair at the roots and scrunching
between fingertips while drying. No matter what
DRYING BASICS
your style, the Conair ® and Jheri Redding
1. Shampoo and condition hair with Conair ® or
lection of expert hair care products will see you
Jheri Redding ® products of your choice. Rinse
through from start to finish.
thoroughly. Towel blot hair to remove excess
moisture. Section hair. Using the dryer along
The Conair ® Quiet Tone ® Dryer with 1875 As soon as there's a new professional styling
watts of power lets you dry and style in tool, Conair brings it to you!
comfort while allowing you to hear everything
else going on around you. CAUTION: Always use diffuser on low
heat/speed. NEVER USE HIGH HEAT/SPEED
FEATURES
SETTING when the Speed Drying Diffuser is
1. Cool Shot Feature Locks in Style
fitted to dryer, as this may lead to damage to
After styling with warm air, press the cool
hair dryer and diffuser attachment due to
shot button. The fan accelerates and speeds
abnormal heat build-up.
cool air to the hair, closing the hair shaft and
locking in style.
2. Power
GET TO KNOW YOUR DRYER
1875 watts of drying power.
3. 2 Speeds/2 Heats
for styling versatility.
4. Removable air filter
Quiet Fan Design
for easy cleaning.
5. Dual voltage
1875 Watts
for worldwide travel.
® col-
Removable Filter
Cool Shot
2 Heat/Speeds
Dual Voltage