Conair 070XCHC Instruction & Styling Manual page 3

SAVE THESE
INSTRUCTIONS
OPERATING INSTRUCTIONS
This appliance is intended for household use
only. Use on Alternating Current (60 hertz) only.
Standard Dryers are designed to operate at 110
to 125 volts A.C.
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature, this
plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety
feature.
IMPORTANT
1875 WATT OPERATING GUIDE
Use of this dryer on the same circuit or fuse
with other electrical products or appliances
may trip a 15 amp circuit breaker or blow a
15 amp fuse.
NEVER replace fuse with one rated higher
than the capacity of the circuit. Doing so
could result in an electrical fire.
SUPER STYLING GUIDE
Your best looks begin with a good haircut that's
well maintained. Always treat hair right with
superior quality shampoos, conditioners, and
finishing products.
DRYING BASICS
1. Shampoo and condition hair with products
of your choice. Rinse thoroughly. Towel blot
hair to remove excess moisture. Section
hair. Using the dryer along with your styling
brush, direct hot air through a section of
hair at a time. Move dryer steadily across
each section so that the hot air passes
through hair. Direct airflow at hair, not
scalp.
2. Keep dryer's air intake vents unobstructed
and free from hair while drying.
3. To avoid overdrying, do not concentrate heat
on any one section for any length of time.
Keep dryer moving as you style.
4. For quick touch-ups between shampoos,
dampen hair with a mist of water before
styling with the dryer.
5. When using your dryer to create curls and
waves, dry hair almost completely on a
warmer temperature setting, then finish
styling with Cool Shot feature to close hair
shaft and lock in style.