Table of Contents
Advertisement
3.1.3 Selecting the destination f."om your Favorites
You can select a location that you have already saved as a Favorite to be your destination.
The procedure is explained starting from the Navigation menu.
EB
. . ".
~'h?"'h"
'*!'!t.>,./,
l;
1.
Tap the following buttons
::M'eilli'i\~fJii,i!{ >~'k'
2.
Tap the Favorite that you want to set as your destination
3
The map appears with the selected point in the middle Tap'
The route is then automatically calculated, and you can start navigating.
from the Cursor menu
3.1.4 Selecting the destination from the POls
You can select your destination from the POls included with Rosen Navigation or from the ones you have
previously created
The procedure is explained starting from the Navigation menu.
1.
Tap the following buttons
2
Select the area around which the POI should be searched
•
•
•
•
~~.
The POI will
be searched around a given address.
The map
ap~
the Cursor in the middle. Modify the location of the
necessary, then tap _
The POI will be searched around the given location
A
Arollnd . ,,",
",;,~:~~~~:
The POI will be searched around the current GPS position
M
Around
, ;·":l;:.,~~~~lt
The POI will be searched around the destination of the active route.
Cursor if
A""AJong
•
~~~~~.,
: The POI will be searched not around a given point but by the size of the detour it
means from the active route. This can be useful if you search for a later stopover that causes only
a minimal detour. For example upcoming petrol stations or restaurants.
3
You can narrow the search with the following:
•
•
Select the POI group (e.g. Accommodation), and after that, if needed, select the POI sUbgroup
(eg Hotel or Motel)
To find the POI by its name, t a p ' " and use the keyboard to enter a part of the name.
•
To list all POls in a given POI group, tap
4.
[optional] When finally the list of results appear, you can sort the list:
28
3.1.3 Selecting the destination f."om your Favorites
You can select a location that you have already saved as a Favorite to be your destination.
The procedure is explained starting from the Navigation menu.
EB
. . ".
~'h?"'h"
'*!'!t.>,./,
l;
1.
Tap the following buttons
::M'eilli'i\~fJii,i!{ >~'k'
2.
Tap the Favorite that you want to set as your destination
3
The map appears with the selected point in the middle Tap'
The route is then automatically calculated, and you can start navigating.
from the Cursor menu
3.1.4 Selecting the destination from the POls
You can select your destination from the POls included with Rosen Navigation or from the ones you have
previously created
The procedure is explained starting from the Navigation menu.
1.
Tap the following buttons
2
Select the area around which the POI should be searched
•
•
•
•
~~.
The POI will
be searched around a given address.
The map
ap~
the Cursor in the middle. Modify the location of the
necessary, then tap _
The POI will be searched around the given location
A
Arollnd . ,,",
",;,~:~~~~:
The POI will be searched around the current GPS position
M
Around
, ;·":l;:.,~~~~lt
The POI will be searched around the destination of the active route.
Cursor if
A""AJong
•
~~~~~.,
: The POI will be searched not around a given point but by the size of the detour it
means from the active route. This can be useful if you search for a later stopover that causes only
a minimal detour. For example upcoming petrol stations or restaurants.
3
You can narrow the search with the following:
•
•
Select the POI group (e.g. Accommodation), and after that, if needed, select the POI sUbgroup
(eg Hotel or Motel)
To find the POI by its name, t a p ' " and use the keyboard to enter a part of the name.
•
To list all POls in a given POI group, tap
4.
[optional] When finally the list of results appear, you can sort the list:
28
Advertisement
Chapters
Table of Contents
