Table of Contents
Advertisement
Installation Guide Toyota Camry
"OPTIONAL"
Install the iPod interface connector in a
location accessible to the end-user
locate the iPod interface module in an area which can
be
serviced in the future.
The iPod cable is intended to be a serviceable item, which plugs
into the iPod/Sal radio Interface Module.
Remove the DVD Transport Screws
There are 2 x Phillips Transport Screws which protect the DVD
Mechanism during transportation.
Transport Screws must be removed prior to installation.
Connect the Power and GPS Harnesses
The GPS Harness must
be
tightened with a WRENCH to ensure
it is properly seated.
Failure to follow this step may result In poor GPS signal
Connect Optional Harnesses such as iPod,
Satellite Radio, Camera, Reverse Sensors
These harnesses must
be
fully engaged prior to the system
installation.
See the Harness Diagrams for more information
Prepare the Vehicle side harnesses for
connection to the Rosen Harness
Use care not to pinch or damage cables as this will cause
performance issues/failures
Rosen
Enten:ltinment
Systems
Inslallallon Guide
Copyright 2009
a'
rights
reS6fVfKJ
DP- TY07f4 Rev C
PageS
Advertisement
Chapters
Table of Contents
