Table of Contents
Advertisement
Installation Guide Toyota Camry
Mount Rosen Navigation i[1to Dash
Be sure to fully engage all connectors
Insert Rosen Navigation System Into Dash and mount
using OEM 4 x 10mm (2 LefU2 Right) screws
Re-install upper vent assembly and be sure to connect all
hamesses
Re-Install Lower Trim Components
Carefully re-installlower dash components
Verify Unit Operation
Power on unit to verify full operation
Insert a DVD to confirm the Video Disable
Circuit is properly Operating.
The Brake Wire must
be
connected to the Park Brake
Indicator Wire to complete a ground when the brake is
engaged.
Launch the Installer Setting Screen
From any screen with the Menu Button, follow these steps
to display the Installer Setting Screen, select:
1) From any Screen. select -Menu·
2) From the Menu Screen, select -Keypad-
3) On the Keypad. Press "7253- and "Enter"
Rosen
Entert~
Systems
Instalation
Guide
.....
s-_....._ _ _
.,
..
_--_
_"
l'orfUttMof_
lII. .U
101N
Owne.
s u,,,...,
Copyright
2009 .. righls reserved
DP-TY0714 Re... C
p. . . .
Advertisement
Chapters
Table of Contents
