Rosen DP-1001 Owenrs Manual page 64

•
•
._._---'._~
_._---._
...
_----
..
- - -
._-_.
--_.-
._----_
.. ..
-
--_
..
_ - - ~
..
- - ~
-----
..
_----_._- - -------_. _._._. .
__
.-
Icon Status for More information
-
GPS position
The more lit bars, the better is the GPS position.
quality
rI
Vehicle type
The symbol displays the vehicle type used for route calculation.
2.3.4 llsing the
CUI"SOI"
Fi rst, place the Cursor at the desired map location with one of the followi ng options:
Use the Find menu to select a location. The map returns with the selected point (the Cursor) in the
middle, and the Cursor menu appears with the available options.
Tap the screen and tap again to place the Cursor at the desired location Now
tap~llj
to open the
Cursor menu.
You can perform the following actions
Button
Info
Action
In the active route, uses the Cursor as the start point by replacing the current GPS
position
In
the active route, uses the Cursor as the destination by replacing the previous
destination
In the active route, uses the Cursor as a via point (an intermediate destination)
preceding the destination
In the active route, uses the Cursor as the destination while keeping the previous
destination as a via point
Shows the different routes calculated by the available routing methods. Choose the
one that suits your needs the best.
Saves the Cursor as a POI
Saves the Cursor as a Favorite location
Saves the Cursor as a Road Safety Camera location
Marks the map with a Pin at the Cursor
Opens a screen with the name, address and coordinate information of the Cursor, and
the list of POls near it
14
•
•
._._---'._~
_._---._
...
_----
..
- - -
._-_.
--_.-
._----_
.. ..
-
--_
..
_ - - ~
..
- - ~
-----
..
_----_._- - -------_. _._._. .
__
.-
Icon Status for More information
-
GPS position
The more lit bars, the better is the GPS position.
quality
rI
Vehicle type
The symbol displays the vehicle type used for route calculation.
2.3.4 llsing the
CUI"SOI"
Fi rst, place the Cursor at the desired map location with one of the followi ng options:
Use the Find menu to select a location. The map returns with the selected point (the Cursor) in the
middle, and the Cursor menu appears with the available options.
Tap the screen and tap again to place the Cursor at the desired location Now
tap~llj
to open the
Cursor menu.
You can perform the following actions
Button
Info
Action
In the active route, uses the Cursor as the start point by replacing the current GPS
position
In
the active route, uses the Cursor as the destination by replacing the previous
destination
In the active route, uses the Cursor as a via point (an intermediate destination)
preceding the destination
In the active route, uses the Cursor as the destination while keeping the previous
destination as a via point
Shows the different routes calculated by the available routing methods. Choose the
one that suits your needs the best.
Saves the Cursor as a POI
Saves the Cursor as a Favorite location
Saves the Cursor as a Road Safety Camera location
Marks the map with a Pin at the Cursor
Opens a screen with the name, address and coordinate information of the Cursor, and
the list of POls near it
14