Rosen DP-1001 Owenrs Manual page 137

Installation Guide Toyota Camry
Unplug Electrical Connections
Carefully remove all harnesses from rear of OEM radio
•JBL Audio equipped vehicles will require additional part #
DP-TYJBL1 audio interface
Remove Factory Brackets/Clips
Remove factory brackets and clips from OEM radio
(8
x
10mm bolts 4 Leftl4 Right)
Re-Install Factory Brackets/Clips on Rosen
Unit
. Re-install factory brackets/clips on Rosen unit
(8 x , Omm bolts 4 Leftl4 Right)
Use Caution around SRS Components
It
is the Installer's responsibility to ensure that the safety
equipment in the vehicle is NOT adversely affected by installation
of this system. Ensure that the routing of the hamesses do NOT
obstruct airbags, SRS or other safety devices.
Mount the GPS and Sat Radio antenna in a
location on the exterior of the Vehicle
Route the GPS hamess away from other power harnesses in the
vehicle.
This will help to ensure optimum performance of the GPS
system.
Rosen Entertainment
systems
InstellBtion Guide
Copyright 2009 .. riphls
f8served
DP-TY0714 RevC