Application Hints - Branson DHA-1000 Operator's Manual

Application Hints

First time cleaning - first experiment with one piece, then proceed with
the remainder.
Solution level - Be sure to maintain solution level within one or two
inches of the tank top. Surface activity can vary with liquid level.
Load size - It is faster and more efficient to run several small loads
rather than a few big loads.
Placing items - Never allow items to sit on the bottom of the tank.
Always place them in a basket or suspend in the solution.
Rinsing items - After cleaning, use clean water to rinse away chemicals
adhering to items.
Lubricating items - When necessary, re-lubricate items immediately
after cleaning.
Drying items - Air drying at room temperature works for some items.
Place parts requiring faster drying time under hot air blowers or in ovens.
Please call your local distributor if you have application questions.
10