Installing The Touch Pad And Button Board - Toshiba Qosmio F40 Maintenance Manual

4.23 Touch Pad and Button Board

Installing the Touch Pad and Button Board

Install the touch pad and button board according to the following procedures and Figure 4-39.
1. Seat the touch pad, button board touch pad bracket in the correct position and secure
it with the five M2x3 black flat head bind screws and two M2x3 black flat head
screw.
2. Seat the Mylar in the correct position.
3. Connect the button board flat cable to CN3001 on the button board.
4. Connect the touch pad flat cables to J1 on the touch pad and CN3000 on the button
board.
Qosmio F40/F45 Maintenance Manual
4 Replacement Procedures
4-71