System Board, Ac In Cable; Removing The System Board, Ac In Cable - Toshiba Qosmio F40 Maintenance Manual

4.11 System Board, AC-IN cable
4.11 System Board, AC-IN cable
Removing the System Board, AC-IN cable
NOTE: Be careful of the eject button for the PC card. It can be damaged when removing
the board. Make sure it is securely installed.
Remove the System Board, MIC cable, AC-IN cable according to the following procedures
and Figure 4-22.
1. Turn the computer upside down.
2. Disconnect the B-CAS card module flat cable from CN814.
3. Disconnect the audio board cable from PJ650.
2. Disconnect the TV splitter cable from CN16.
3. Disconnect the two TV antenna cables from TV tuner.
4. Turn the computer right side up.
5. Remove one M2.5x8 black flat head screw on the system board.
6. Remove the system board.
TV antenna
Qosmio F40/F45 Maintenance Manual
B CAS card module flat cable -
CN814
PJ650
Figure 4-22 Removing the system board
4 Replacement Procedures
Audio board cable
TV splitter cable
CN16
TV antenna
4-43