Removing The Optional Memory - Toshiba Qosmio F40 Maintenance Manual

4 Replacement Procedures

Removing the Optional Memory

Remove the optional memory (module) according to the following procedures and Figures 4-
4, after checking that the computer is turned off in boot mode.
CAUTION: Remove the optional memory after turning off the computer. If this is
violated, the computer or memory can be damaged.
1. Turn the computer upside down.
2. Release one optional memory cover securing the screw.
3. Remove the memory cover.
CAUTION: Do not touch the connectors on the memory modules or in the computer.
Contaminated connectors can cause memory access problems.
4. Spread out the two memory lock latches so that the memory module pops up.
5. Pull the memory module up and out at an angle, using care to avoid touching the
connectors.
4-14
Memory cover
Slot B
Slot A
Figure 4-4 Removing the optional memory
Nemory cover secure screw
Slot B
Slot A
Memory
Memory
Stoper
Qosmio F40/F45 Maintenance Manual
4.1 General