Toshiba Qosmio F40 Maintenance Manual page 82

3.2 Quick Start
Current Loop Count: In LOOPBOUND mode, it will display the total LOOP number
planning to execute and the current LOOP number have been finished, e.g. 'COUNT:
01/01' in the above screen;
CPU Temperature: Detect the temperature in the current CPU, e.g. 'CPU: 49C' in the
above screen;
Remaining Battery Capacity: Remaining Battery Capacity detected in the current
Battery, e.g. 'BAT: 97%';
Test Order: Define the test sequence. There is two sequence modes: Sequential Test
Mode and Random Test Mode. The default mode is Sequential Test Mode, it would
displays 'ORDER: SEQ' as in the above screen;
LOG File Name: Display the file name of the test log, e.g. Quick.Log in the above
screen;
Start Test Time (S.TIME): Display the test start time for the current test item or the test
script, e.g. 'S.TIME: 2006-07-05 09:21:16' in the above screen;
Break On Error: Display 'HALT' as shown in the above screen when 'Break On Error'
is enabled;
Wait On Error: Display 'WAIT' as shown in the above screen when 'Wait On Error' is
enabled;
Pause Enable: Display 'PAUSE' when "Pause Enable" is enabled;
Manual Interrupt Method: Display 'Esc: Break' to tell the user how to manually
interrupt the test process.
QosmioF40/F45，dynabook Qosmio F40 Maintenance Manual
3 Diagnostic Programs
15