Defaults And Dip Switches; Default Settings - Epson FX Series User Manual

Defaults and DIP Switches

In this Appendix we list the default settings for your printer, show-
ing which settings you can change and the way you can change them.
Some of the defaults can be changed by using DIP switches; the sec-
ond section illustrates and discusses those defaults.

Default Settings

When your FX comes from the factory, it is set to the following
defaults. An asterisk (*) means that you can change the default for
this setting by changing a DIP switch, while a bullet (•) means that
you can change this setting in a program, by using an ESCape code.
* Printer activated
l
Roman character font
l
* Pica pitch
l
Margins set at maximums: left margin at 0, and, since the default
l
is Pica, the right margin at 80 on the FX-80 and at 136 on the
FX-100
12-dot line spacing
l
66 lines (11 inches of default line spacing)
l
Vertical tabs set at every two lines
l
Vertical tab channel 0 selected
l
Horizontal tabs set at every eight spaces
l
* USA character set
l
Appendix E
295