Power Button Board; Removing The Power Button Board; Installing The Power Button Board - Toshiba STREAMLINE-S 10 Maintenance Manual

4.14 Bluetooth Module 4 Replacement Procedures
4.7

Power Button Board

Removing the Power Button Board

Remove the power button board according to the following procedures and Figure 4.15.
1. Remove one M2x3 screw securing the power button board to the back of the logic upper
assembly.
2. Remove the power button board from the logic upper assembly.
M2x3*1
Figure 4.15 Removing the power button board

Installing the power button board

Install the power button board according to the following procedures.
1. Seat the power button board in the correct position on the back of the logic upper assembly.
2. Secure the power button board with one M2x3 screw.
Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-23