Toshiba Satellite Pro T110DD Maintenance Manual page 193

Chapter 4 Replacement Procedures
Installing the system board
The following describes the procedure for installing the system board.
1. Connect the RGB cable and DC-IN cable to the connector on the system board.
2. Secure the system board with the following screws.

3. Connect the LAN BOARD FFC, LCD CABLE, Antenna cable, Audio board FFC,
HDMI FFC, Bluetooth cable, SIM CARD FFC, TP board FFC, Power Board
FFC, HDD cable to the connector on the system board.
Satellite T110D / Satellite Pro T110D / PORTEGE T110D Maintenance Manual (960-Q08)
M2.03F FLAT BIND screw x2
41