Chapter 4 Replacement Procedures
4.5
Keyboard
Removing the keyboard
The following describes the procedure for removing the keyboard (See Figure 4-5-1 to 4-5-2).
CAUTION: As the keycap may fall out, when handling the keyboard always hold it by the
frame and do not touch the keycap.
1. Upside down the computer and remove the battery.
2. Remove the screws on KB holder.
M2.0x3.0F
3. Remove the screw securing Keyboard.
M2.5x8.0F
4. Open the display.
5. Insert your finger into the slot between the KB holder and the keyboard. Then, lift up
the keyboard holder to remove it.
6. Insert your finger into the slot between keyboard and top cover. Then lift up the
keyboard to remove it.
7. Disconnect keyboard cable.
Satellite T110D / Satellite Pro T110D / PORTEGE T110DMaintenance Manual (960-Q08)
Flat BIND screws
Flat BIND screws
x2
x2
17