Contents Of Shipping Carton; Tools Required For Assembly; Assembly - Jet AFS-1000B Owner's Manual

Contents of Shipping Carton

1. Air Filtration Unit
1. Remote Control
2. AAA Batteries
4. Eye Bolts & Nuts
4. Mounting Brackets
8. Hex Cap Screws
8. Lock Washers
4. Foam Pads
1. Velcro Pad
1. Manual and Warranty Card

Tools Required for Assembly

No. 2 Cross Point Screwdriver
10mm Wrench
The air filtration unit does not require much

assembly.

You
consideration how and where you will place
this unit.
It can be mounted horizontally and vertically.
The unit can also be hung from the ceiling.
This unit will work best if it is located away
from corners, and heating/cooling vents.
If using on sawhorses the air filtration unit
should be clamped in place.
This unit is specifically designed to circulate
and filter non-metallic
generated throughout the work area.
Assembly
CAUTION!
Mounts must be anchored to building
structure, which will support a minimum of
at least 100 pounds. Never mount to
surfaces such as dry wall or false ceiling
grids, etc.
1. Remove all packing from inside of the
unit by removing the outer filter and
inner filters.
2. The air filtration unit can be hung from the
ceiling. Remove four screws from the
cabinet top (A, Fig. 1).
3. Hang the unit using four eyebolts (B, Fig. 1),
and four hex nuts (C, Fig. 1) provided.
should take into
dust, which is
6