Jet AFS-400 Features

JET AFS-400 Air Filtration Unit
The new JET AFS-400 Air Filtration unit has been
designed with the small to mid-sized shop in mind.
Its 260, 362, and 409 CFM rates will clean and
circulate the air in a 20' x 20' x 8' shop at a rate of 7
cycles per hour!
To be most compatible with common space
restrictions, the JET AFS-400 Air Filtration Unit has
rubber feet on its bottom panel so it can be operated
while sitting on a bench or table. The 20-1/4" X 17 X
10-1/8", 31-lb unit can also be hung from a ceiling
and we include the necessary hardware for the most
common installations.
Task Compatible
Not all woodworking tasks generate the same amount of dust so we made the JET AFS-
400 Air Filtration Unit versatile. The 1/8HP, 115V motor is electronically controlled to
produce airflow rates of 260, 362 and 409 CFM (cubic feet per minute). That range of
speeds allows you to set the airflow rate most appropriate to handle the current situation
effectively while conserving power and saving money.
The JET AFS-400 comes with a handy remote control (left) that accesses all of the
control panel features from across the shop! The control panel (right) has LED light
that indicate the current settings, including the timer so you know when the AFS-
The JET AFS-400 Air Filtration Unit has a pushbutton control panel at the rear of the
unit. In addition to selecting speeds, the JET AFS-400 Air Filtration Unit control panel
features a timer that allows programming it to run 1, 2, or 4 hours before shutting off
automatically. We also include a remote control that provides full access to all of those
control functions from across the shop!
400 will shut off.
The JET AFS-400 was designed
specifically to be effective in small to mid-
sized woodworking shops!
This versatility is
further enhanced by the
portability of the JET
AFS-400 Air Filtration
Unit. Moving the
intake closer to the task
can often allow using
one of the lower flow
rates without
sacrificing
effectiveness.
Control