Remaining Hazards; Machine Specifications; Technical Data; Noise Emission - Jet AFS-400 Operating Instructions Manual

Keep this operating instruction close by the product, protected
from dirt and humidity, and pass it over to the new owner if
you part with the tool.
No changes to the air cleaner may be made.
Daily inspect the function and existence of the safety
appliances before you start the air cleaner.
Do not attempt operation in this case, protect the air cleaner
by unplugging the power cord.
Always disconnect the air cleaner from the power source
(unplug) before servicing or changing filters.
Never reach into the machine while it is operating or running
down.
Replace contaminated filters.
Clogged filters will reduce the amount of air circulation.
During the changing or cleaning of the filters it's necessary to
use a mask (mask with filtration).
The machine is designed to operate in closed rooms and can
be placed on a stable and levelled surface, or can be wall or
ceiling mounted.
If ceiling mounted, the bottom of the air cleaner must be at
least 2,1m above the floor.
Mounts must be anchored to building structure, which will
support a minimum of 30 kg.
Never mount to surfaces such as dry wall or false ceiling grids,
etc.
Make sure that the power cord does not impede work and
cause people to trip.
Do not operate the machine under the influence of drugs,
alcohol or any medication. Be aware that medication can
change your behaviour.
Never leave a running machine unattended. Before you leave
the workplace switch off the unit.
Keep children and visitors a safe distance from the work area.
Do not operate the electric tool near inflammable liquids or
gases.
Observe the fire fighting and fire alert options, for example the
fire extinguisher operation and place.
Do not use the air cleaner in a dump environment and do not
expose it to rain.
Never duct a machine directly into the air cleaner.
Do not use this equipment to filter volatile fumes or smoke.
Wood dust is explosive and can also represent a risk to health.
Dust form some tropical woods in particular, and from
hardwoods like beach and oak, is classified as a carcinogenic
substance.
The air filtration system will support, but cannot subsidise the
application of a suitable dust extraction device for your
woodworking machines.
Do not stand on or hang on the air cleaner.
Connection and repair work on the electrical installation may
be carried out by a qualified electrician only.
Have a damaged or worn power cord replaced immediately.

3.3 Remaining hazards

When using the unit according to regulations some remaining
hazards may still exist.
Woodworking dust can be a health hazard. The air filtration
system will support but cannot subsidise the application of a
suitable dust extraction device for your woodworking
machines.
The use of incorrect mains supply or a damaged power cord
can lead to injuries caused by electricity.

4. Machine specifications

4.1 Technical data

Air volume flow
Programmable timer
Replacement outer filter
Washable inner filter
Overall (LxWxH)
Net weight
Mains
Output power
Reference current
Extension cords (H05RN-F):
Installation fuse protection
Protection class

4.2 Noise emission

Acoustic pressure level (according to EN ISO 11202):
low speed
medium speed
high speed
The specified values are emission levels and are not
necessarily to be seen as safe operating levels. This
information is intended to allow the user to make a better
estimation of the hazards and risks involved.
4.3 Content of delivery
Air filtration unit
Infrared remote control unit
AA batteries
Eye-bolts and nuts
Mounting hook screws
Chain sections
Operating manual
Spare parts list
4
8, 10, 11.5 m³/min
1, 2, 4 hours
5 micron
1 micron
520x440x265mm
14 kg
1~230V, PE, 50Hz
0,1 kW (0,13HP) S1
1 A
3x1,5mm²
10A
I
LpA 51 dB(A)
LpA 57 dB/A)
LpA 61 dB(A)
Fig 1