Table of Contents
Advertisement
can greatly reduce the amount of time the battery
charge will last. Also, some USB devices might
function only if they are using their own power
supply.
Attaching the port replicator
Snap the included port replicator onto the rear of the
FlipStart as shown in the illustration. Then, connect
other hardware to the FlipStart to make your comput-
ing experience easier and more efficient.
2
CAUTION!
Do not insert the metal tab first.
Always attach the two ends of the port
replicator in the order shown above, or you
might damage the FlipStart or the port
replicator.
Connecting an external monitor
To use an external CRT or LCD monitor with your
FlipStart, attach the port replicator to the rear of your
FlipStart, and then connect the monitor cable to the
VGA port on the port replicator.
To switch the display to the external monitor, press
+
Connecting Bluetooth devices to
the FlipStart
Nearly any Bluetooth-compatible device can be con-
nected to your FlipStart. To add a device, first consult
that device's instructions for any special needs or
limitations. Then, use the Bluetooth Settings wizard to
add the device:
.
If the Bluetooth radio is turned off on your
1
FlipStart, enable it by opening Control Center and
choosing Turn Bluetooth, Wi-Fi & Cellular devices
on/off. Set the Bluetooth device to On in the Con-
nectivity Status area.
.
Double-click the Bluetooth icon in the Windows
system tray, and follow the on-screen instructions
for adding a new device.
Note:
You may need to refer to the instruction manual
for your Bluetooth device for more information
during the connection process.
.
Advertisement
Table of Contents
