Table of Contents
Advertisement
Setting up
36
Attaching the port replicator
Snap the included port replicator onto the rear of the FlipStart as shown in the illustration.
Then, connect other hardware to the FlipStart to make your computing experience easier and
more efficient. For more information about the port replicator, see Using the port replicator (on
page 60).
Connecting an external USB mouse or USB keyboard
You can easily add a USB keyboard or mouse to your FlipStart. Simply plug the USB connector
into a USB port on the back of the FlipStart or the port replicator, and the device will be
recognized and ready for use.
Connecting an external VGA monitor
To use an external VGA monitor with your FlipStart, connect the port replicator to the rear of
your FlipStart, and then connect the monitor's VGA cable to the port replicator. To switch the
display to the external monitor, press
+
.
.
Advertisement
Table of Contents
