Page 1
BIKE coMpUTEr ExpAnsIon cadence hEArT rATE ALTITUDE powEr cALcULATIon watt ROX 9.1 BEDIEnUnGsAnLEITUnG InsTrUcTIon MAnUAL MoDE D‘EMpLoI IsTrUZIonE D‘Uso MAnUAL DE InsTrUccIonEs DEUTsch ITALIAno EnGLIsh EspAÑoL FrAnÇAIs...
Middle section/Icon display ........................46 3.4.3 Lower DOT Matrix block .......................... 46 Menu tree of the SIGMA ROX 9.1 ....................... 47 What are the functions and properties of the SIGMA ROX 9.1? ..........48 3.6.1 Scope of functions ............................ 48 3.6.2 Motion sensor ............................
Page 3
System requirements ..........................66 Installing the SIGMA DATA CENTER ....................66 Installing the docking station ......................... 67 Important notes/Troubleshooting/FAQ .................. 67 Watertightness of the SIGMA ROX 9.1 ..................... 67 Care of the chest belt ..........................67 Training tip ..............................68 Troubleshooting ............................68 FAQ (Frequently Asked Questions) ......................
SIGMA SPORT ® . Your speed, time, distance etc. new SIGMA ROX 9.1 will be a faithful cycling k Information about your location – companion for years to come. To learn about altitude, inclination etc. the various functions on your new bicycle k Information about your physical state –...
SIGMA DATA fittings CENTER software CD 2 InSTAllInG ThE SIGMA ROX 9.1 AnD ITS AccESSORIES Illustrations regarding to these assembly notes can be found in the enclosed folded sheets! 2.1 InSTAllInG ThE BRAckET k Handlebars or front end k Remove yellow film 2.2 InSTAllInG ThE TRAnSMITTERS –...
2 ASSEMBlInG ThE SIGMA ROX 9.1 AnD ITS AccESSORIES 2.5 SynchROnIzATIOn Once active, the SIGMA ROX 9.1 is ready for The cadence transmitter and the chest belt synchronization with the transmitters – speed, automatically synchronize at this time. Once cadence, and heart rate.
5 seconds Favorites A” 3.2 nAvIGATIOn PRIncIPlE OF ThE SIGMA ROX 9.1 The SIGMA ROX 9.1 has up to five menu Press the button again within two seconds to levels. When navigating through the SIGMA confirm the function displayed in the naviga- ROX 9.1 menus and submenus, you should...
Scroll backwards in Scroll forwards in a menu level… a menu level… …or decrease/change …or increase/change the value displayed the value displayed. 3.4 DISPlAy lAyOUT – FUncTIOnAlITy The display on the SIGMA ROX 9.1 is divided into 3 main areas: www.sigmasport.com...
3 EvERyThInG ABOUT ThE SIGMA ROX 9.1 3.4.1 UPPER DOT MATRIX BlOck This section shows various information depending upon the menu. 3.4.1.1 FAvORITES A AnD B Up to 4 current values can be displayed here: k The current altitude (permanent)
3 EvERyThInG ABOUT ThE SIGMA ROX 9.1 3.4.2 MIDDlE SEcTIOn/IcOn DISPlAy The display on this section shows you the current speed, for example. The following symbols are also visible in this part of the display: Wheel I/Wheel II symbol Speed comparison...
3 EvERyThInG ABOUT ThE SIGMA ROX 9.1 3.5 MEnU TREE/ORGAnIzATIOn OF ThE SIGMA ROX 9.1 Favorites A Favorites B Trip Values Cycling Heart rate Temperature Uphill Downhill Time Memory 7 Trips Total values Logbook GHOST RACE Trip 1… Cycling Heart rate...
3 EvERyThInG ABOUT ThE SIGMA ROX 9.1 3.6 WhAT ARE ThE FUncTIOnS AnD PROPERTIES OF ThE SIGMA ROX 9.1? The SIGMA ROX 9.1 is a very versatile computer, which helps track and evaluate a race/training session. 3.6.1 ScOPE OF FUncTIOnS The SIGMA ROX 9.1 is equipped with very...
The SIGMA ROX 9.1 has two different forms of data storage: Trip & Logbook 3.6.5.1 7 TRIPS In this memory you can selectively store almost all trip data, as shown in the SIGMA ROX 9.1 display. You can save up to 7 trips.
In this from the SIGMA ROX 9.1 to your PC. way you can set your SIGMA ROX 9.1 quickly You can also program the SIGMA ROX 9.1 and simply, without having to click through all the menu levels.
The following functions belong to this submenu: k Distance k Development k Ride time k Average development k Average speed k Actual performance k Maximum speed k Average performance k Distance +/- k Maximum performance k Average cadence k GHOST RACE k Maximum cadence ROX 9.1...
Page 16
5 DEScRIPTIOn OF FUncTIOnS (functions shown during the ride) 5.2 BIcyclE FUncTIOnS This is a separate distance counter (either distance + or distance -). This distance counter allows an interval training or a trip according to a Roadbook. It is pre-programmable and can be changed from + to - without having to go into the main settings.
Calories burnt k Maximum heart rate k Time in the first training zone The SIGMA ROX 9.1 has 3 heart rate zones. These zones are calculated automatically when the “user” settings are entered. The 3 pre-calculated zones are: k Zone 1: 55-70% of max. HR Recovery training k Zone 2: 70-80% of max.
5 DEScRIPTIOn OF FUncTIOnS (functions shown during the ride) 5.5 UPhIll FUncTIOnS All uphill functions can be found under: “Trip data/uphill”. The following functions belong to this submenu: k Trip climb meters k Average expansion uphill k Maximum altitude k Rate of ascent k Maximum rate of ascent k Distance uphill uphill...
To activate a function with the light switched on, another button must be pressed within 3 seconds until you reach the required function. note: When the SIGMA ROX 9.1 is in sleep mode, the light manager is automatically disabled. ROX 9.1...
You can find this value on street plans or pressure reduced to sea level by searching maps. It is set in the SIGMA ROX 9.1 once “current sea level pressure” in your and can be calibrated in just a few seconds.
To evaluate performance, several values have to be entered in the ROX 9.1: Weight of the bike and the cyclist, bike type and position of the cyclist on the bike, cyclist’s height and shoulder width.
6 USInG ThE SIGMA ROX 9.1 6 USInG ThE SIGMA ROX 9.1 In this chapter we explain all the functionalities of the SIGMA ROX 9.1 so that you can ride efficient. 6.1 FAvORITES A AnD B The favorites A and B are two sections where...
6 USInG ThE SIGMA ROX 9.1 6.2.2 START/STOP lOGBOOk The logbook can only be started if the SIGMA The function must be manually started and ROX 9.1 has been fitted to the bracket. stopped, however. 6.2.2.1 STARTInG/STOPPInG ThE lOGBOOk - /+ SELECT ! 6.2.2.2 SETTInG ROUTE POInTS...
6 USInG ThE SIGMA ROX 9.1 6.3 SETTInG TO zERO/STORInG InDIvIDUAl TRIPS (cURREnT vAlUES) The trip values from the SIGMA ROX 9.1 are Deleting/saving the trip data is only possible not automatically saved. Saving in the “7 trips” in the main menus: “Favorites A”, “Favorites memory is done manually.
1. Unit All the functions contained there can either be k 2. Bicycle I set directly in the SIGMA ROX 9.1, or set on k 3. Bicycle II a PC and transferred to the SIGMA ROX 9.1 k 4. Home altitude afterwards.
7 SETTInGS 7.2.2 SETTInG/USER/BIRThDAy ENTER ! DONE - /+ - /+ NEXT SAVE - /+ 7.3 UnIT k Language k Volume k Kmh/mph k Zone alarm k Clock k Button info k Date k My Name 7.4 BIcyclE I k Bike type k Wheel size k Bike weight www.sigmasport.com...
3. Heart rate zone k Shoulder width 7.8 FAvORITES A AnD B 7.8.1 FAvORITES A Distance % of the maximum Trip time heart rate Average speed Actual performance Maximum speed Stopwatch GHOST RACE Actual temperature 10. Clock ROX 9.1...
7 SETTInGS 7.8.2 FAvORITES B Distance Distance uphill Ride time Rate of ascent Average speed Actual performance GHOST RACE % of the maximum Trip alti. uphill heart rate 10. Clock 7.9 TOTAl vAlUES 7.9.1 cyclInG k Distance bike I k Distance bike II k Ride time bike I k Ride time bike II 7.9.2 hEART RATE...
Ride time downhill bike II k Distance downhill bike I k Distance downhill bike II 7.10 FAcTORy SETTInGS You can reset your SIGMA ROX 9.1 to the To reset to factory settings, see illustrations factory settings at any time. By doing this, below: all total values are set to zero and all default settings will be restored.
8 Pc InTERFAcE/SIGMA DATA cEnTER With the aid of the interface between the k Check the battery status of all the parts SIGMA ROX 9.1 and your PC, you can transfer to the appliance the logged data or the trip and total values to k Download the saved data (memory, your PC.
For people with pace makers, we recommend exercise program. This is particularly checking the compatibility of the SIGMA important if you have underlying cardio- ROX 9.1 and your pace maker with your vascular problems. doctor before using the chest belt. 9.4 TROUBlEShOOTInG...
9.5 FAQ (FREQUEnTly ASkED QUESTIOnS) can I change the batteries myself? The altitude changes even though I remain All parts on the SIGMA ROX 9.1 are designed at the same location, why? with a battery compartment that makes it The altitude measurement on the SIGMA possible for the user to change the battery.
10 BATTERy chAnGE 10 BATTERy chAnGE The battery status on the unit and that of Please refer to the enclosed sheet for how to the respective transmitter is conveyed to the change the battery on the relevant units. receiver shortly before the battery life comes to an end.
3487 Swenson Ave. a claim is made after the two year period, St. Charles, IL 60174, U.S.A. SIGMA USA will replace product up to 5 years with proof of purchase. If proof of purchase Service-Tel: 888-744-6277 is not available, SIGMA will repair or replace E-mail: sales@sigmasport.us...
Page 38
However, there is no Changes or modifications made to this guarantee that interference will not occur equipment not expressly approved by SIGMA in a particular installation. If this equipment may void the FCC authorization to operate does cause harmful interference to radio or this equipment.
Page 39
+ 49 (0) 63 21- 9120 - 140 Fax. + 49 (0) 63 21- 9120 - 34 E - mail: sigmarox@sigmasport.com SIGMA SPort USA North America 3487 Swenson Ave. St. Charles, IL 60174, U.S.A. Tel. +1 630 - 761 - 1106 Fax.
Page 40
+ 49 (0) 63 21- 9120 - 140 Fax. + 49 (0) 63 21- 9120 - 34 E - mail: sigmarox@sigmasport.com SIGMA SPort USA 3487 Swenson Ave. St. Charles, IL 60174 INSTALLATION OF THE 2ND BIKE Tel. +1 630 - 761 - 1106 Fax.
Page 41
Oder ATTACHING THE CHEST STRAP DOCKING STATION INSTALLING THE SIGMA ROX TO THE BRACKET k Rub water or cardio-gel on the electrodes BATTERY CHANGE BIKE COMPUTER BATTERY CHANGE SPEED TRANSMITTER BATTERY CHANGE CADENCE TRANSMITTER BATTERY CHANGE HEARTRATE TRANSMITTER k Unit battery...
Need help?
Do you have a question about the ROX 9.1 and is the answer not in the manual?
Questions and answers