Quick Start - JR SX600 User Manual

SX600 QUICK START
In this manual you will find in-depth instructions
that detail all the steps and procedures you should
follow in order to program each of the SX600's
features. For modelers who want to get into the
air fast, we have provided Quick Start. Quick
Start covers the basic programming information
necessary to get you airborne. Later, when you want
to learn more about specific features of the SX600,
1 DIGITAL TRIM SETTINGS
Turn on the transmitter and check to ensure
that the aileron, elevator, and rudder trim
valves are set to the 0 (neutral) position.
Next, set the throttle trim valve to the full low
2 SERVO REVERSING
With the transmitter on, press the Scroll and Increase buttons
upward simultaneously until a beep is heard.
4
��� � ����
turn to the appropriate pages(s) in this manual for
more detailed programming information.
Note: Please charge the system batteries as
indicated in step 4.1 before attempting the
Quick Start setup and again before flying the
model.
(-40) position by pressing the throttle trim
lever down.
SX600 MANUAL Quick Start