Avg For Kerio Mailserver Maintenance - AVG Linux E-mail Server User Manual

AVG Linux Email Server / User Manual

6.2. AVG for Kerio MailServer Maintenance

The anti-virus protection mechanism is integrated directly into the Kerio
MailServer application. In order to activate e-mail protection of Kerio MailServer
by the AVG Anti-Virus scanning engine, launch the Kerio Administration
Console application (using the kerioadmin command in your shell). In the control
tree on the left side of the application window choose the Antivirus sub-branch in
the Configuration branch:
Click the Antivirus item to open the Antivirus dialog window. There are three tabs
in the window:
Antivirus
Attachment Filter
Action
To save the changes press the Apply button in the bottom area of the configuration
window. You can also return to the previously saved state by pressing the Reset
button.
a) Antivirus Tab
To activate AVG for Kerio MailServer, select the Use external antivirus
radio button and choose the Grisoft AVG for Linux Edition 7.1 item from
the external software menu on the Antivirus tab of the configuration window:
You can press the Options button to open the following window:
In this window you can change the values of the address and port the AVG for
Linux e-mail scanning daemon is listening on.
Note: You must set the appropriate values here, if you changed the address
and port default settings in the AVG for Linux E-mail Server configuration
file (refer to section
on the configuration file)!
Copyright (c) 1992-2006 GRISOFT, s.r.o. All rights reserved.
8.3 Configuration File/AvgDaemon
29
for detailed information
www.grisoft.com