Routine Maintenance - Clarke 07012A Operator's Manual

ENGLISH
EN

Routine Maintenance

The following items need to be periodically inspected and
maintained to keep your sander in good working condi-
tion.
Sanding Chamber
Periodically blow out the sanding chamber to prevent
large accumulations of debris which could interfere with
the performance of the dust recovery system.
Wheels
Periodically remove the debris from the truck and caster
wheels. Debris can cause waves on a sanded surface.
Dust Bag
Remove the dust bag from the machine and shake it
thoroughly to remove the sanding dust from the dust bag.
Turn the dust bag inside out and machine wash in cold
water to prevent pore blockage and loss of dust recovery.
Drive Belt
Periodically check the drive belts for broken cogs or
frayed edges. Frayed edges may indicate poor tracking.
Realign effected belt.
Bearings
Periodically check the bearings for wear or damage ac-
cording to the following schedule.
Arbor shaft
Motor shaft
Fan shaft
-12- Form No. 70399B
Relubricate every 150
hrs. w/.10 oz. of a NLGI
0 0
grade 2, -30 F to 250 F,
0
58-75 SUS at 210 F,
grease lubricant.
st
after 1 5000 hrs.
After fi rst 1500 hrs.
Clarke
®
American Sanders Operator's Manual (EN) - EZ-8 Sander HDTR