Routine Maintenance - Clarke American Sanders EZ-8 CE Operator's Manual

ENGLISH
EN

Routine Maintenance

The following items need to be periodically inspected
and maintained to keep your sander in good working
condition.
Sanding Chamber
Periodically blow out the sanding chamber to prevent
large accumulations of debris which could interfere
with the performance of the dust recovery system.
Wheels
Periodically remove the debris from the truck and
caster wheels. Debris can cause waves on a sanded
surface.
Dust Bag
Remove the dust bag from the machine and shake it
thoroughly to remove the sanding dust from the dust
bag. Turn the dust bag inside out and machine wash
in cold water to prevent pore blockage and loss of
dust recovery.
Drive Belt
Periodically check the drive belts for broken cogs or
frayed edges. Frayed edges may indicate poor track-
ing. Realign effected belt.
Bearings
Periodically check the bearings for wear or dam-
age according to the following schedule:
Arbor shaft
Motor shaft
Fan shaft
- 12 - FORM NO. 70147B
Relubricate every 150 hrs.
w/.10 oz. of a NLGI grade
0 0
2, -30 F to 250 F, 58-75
0
SUS at 210 F, grease
lubricant.
st
after 1 5000 hrs.
After fi rst 1500 hrs.
Clarke
®
American Sanders Operator's Manual (EN) - EZ-8 Sander (CE)