Bully Dog Watchdog Owner's Manual page 43

Vehicle Setup wizard
The Vehicle Setup Wizard appears the very first time the WatchDog is setup. The Setup Wizard can
be activated at any time by entering this menu. The Setup Wizard process is described in detail in
section 2 of the operation part of the manual.
Press the "Next" button to start the
Setup Wizard.
This option is very useful if the
Hint:
WatchDog is ever transferred to a new
vehicle.
Set Engine Size (Displacement)
Choose a correct engine size (displacement) in liters for the vehicle that the WatchDog is installed
on. Refer to vehicle owners manual or the engine information sticker located near the top of the
radiator and fan to find the correct size (displacement) for the vehicle.
Press the "Go Back"
button when the
correct size has
been highlighted.
Go Back
ENGINE SIZE
to Vehicle Setup
Engine Sizes
Select engine
displacement
3.9
4.0
Engine Sizes
4.1
4.2
4.2L
4.3
4.4
4.5
4.6
OperATION
SETUP WIZARD
Next
WatchDog for your vehicle.
Make sure the WachDog is connected to
the vehicle's OBDII port and turn the
key to the RUN position.
Exit
Scroll up or down
using the indicated
buttons to high-
light the correct
engine size.