Bully Dog Watchdog Owner's Manual page 35

Performance Test:
Selecting "Performance Test" will initiate a 1/4 mile test. The test will appear differently based on the
type of Performance Testing style that is selected. There are two different types of performance tests
that can be ran. Those two types of the tests are displayed below. To select the preferred performance
test type select that in the Performance Testing Setup menu.
Special Note: This performance racing function should only be used on a sanctioned 1/4 mile
drag racing track. Street racing is illegal and extremely unsafe.
• Speed Sensitive Performance Test:
this test type will instruct the end user to first bring
the vehicle to a stop. Once the vehicle is at zero
miles per hour the WatchDog will instruct the driver
that the test will begin once the WatchDog detects
Speed.
• Race Tree Performance Test:
Race Tree style performance test it is important that
the vehicle should already be at a complete stop.
Once initiated the WatchDog will display a classic
drag race tree on the screen. As soon as the lights
on the drag race tree turn green the WatchDog will
begin to record the vehicles time. It will not wait to
detect speed before it starts recording.
Once a complete 1/4 mile has been completed the WatchDog will display the results
• Results Screen:
screen. If the user wants to save the test so it can be displayed and analyzed on a PC then the run can be
saved to the SD card by immediately going to the Save Test To SD Card Menu.
Once initiated
Before initiating the
OperATION
PERFORMANCE TEST
Go Back
TEST STARTS
WHEN VEHICLES READS
SPEED