Carton Contents; Unpacking And Cleaning - Delta SA180 Instruction Manual

1
4
3
7
6
13
11
12
Fig. 1A Sander Parts
1. Belt Assembly
2. Motor, Belt, and Base
3. Disc Table
4. Belt Table
5. Inside Pulley guard
6. Upper Disc guard
7. Lower Disc guard
8. Clamp Handles
9. Disc Plate
10. Sanding Disc
11. 8mm Allen Wrench
12. 2.5mm Allen Wrench
13. Miter gage
14. Dust Chute
UNPACkING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your
machine.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
CARTON CONTENTS
2
5
8
10
14
Fig. 1A
1
2
3
9
4
Fig. 1B Hardware
1. M10x1.5x20mm Hex Socket Head Screw (2)
2. M6x1x15mm Cheese Head Screw (1)
3. M4x.07x45mm Cheese Head Screw (1)
4. M4x.07x10mm Cheese Head Screw (5)
5. 10mm Flat Washer (4)
6. 10mm Lockwasher (2)
7. 3/16" Flat Washer (2)
8. 6.4mm Internal Tooth Lockwasher (1)
9. M4x.07 Wing Nut (1)
8
5
6
9
7
8
Fig. 1B