Functional Description; Carton Contents - Delta 31-260X Instruction Manual

FOREWORD
The Delta Model 31-260X is an 18" x 36" drum sander with a two-speed drum. Its single-piece frame and cast-iron table
construction provides accuracy, stability, and easy adjustments. This unit can be fitted with an optional outboard shaft that
accommodates an accessory pneumatic drum for contour sanding. The 31-260X will provide accurate sanding for wood up to
18" in one pass (36" in two passes).
NOTICE: The manual cover illustrates the current production model. All other illustrations contained in the manual are
representative only and may not depict the actual labeling or accessories included. These are intended to illustrate
technique only.
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your
machine.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
CAUTION TAG
Pay close attention to caution tags attached to this machine and follow these instructions precisely.
This machine is heavy. Remove the container from around the machine. DO NOT lift it from the
container. Carefully unpack all loose items from the shipping container and cut the carton from around the machine.
1
1.
Drum Sander
2.
Stand Parts
a. Side Wall (2)
b. Back Bracket
c. Front Bracket
d. Legs (2)
E. End Cap
F. Leveling Foot with jam nut (4)
3.
M8 Flat Washers (4)
4.
M8-20 Hex-Head Bolt (4)
5.
M8 Flange Nut (16)
6.
M8 x 20 Carriage Bolt (16)
7.
5/16 -18 Flange Nuts (4)
8.
5/16" Lock-washers (4)
9.
5/16-18 x 1" Socket Head Bolts (4)
10.
1/8" T-Handle Hex Wrench
11.
10-32 x .75 Indicator Bolt
12.
#10 Flat Washer
13.
SA Indicator
14.
Elevation Handwheel

FUNCTIONAL DESCRIPTION

CARTON CONTENTS

2D
2E
Feed Table
2A
2B
2C
2F
11 12
6
3
4
6
5
7 9
8
10
13
14